Ftp2

Set to 1 to request cancellation of the operation currently running on this object. Long-running network and file-transfer methods periodically check this property; methods that complete quickly may finish before the request is observed.

A synchronous call can be cancelled from another thread by setting this property on the same object. The property is reset to 0 after cancellation is processed, and a stale request is cleared when a later method begins.

Specifies the FTP account string sent with the ACCT command when a server requires an account in addition to the username and password. Most FTP servers do not require this value, so leave it empty unless the server administrator or login instructions explicitly provide an account name.

Specifies the last local TCP port that may be used for active-mode data connections. Use this property together with ActivePortRangeStart to define the allowed range.

Each FTP directory listing, upload, and download uses a separate data connection. In active mode, the client chooses a port in this range and advertises it to the server with PORT or EPRT.

Specifies the first local TCP port that may be used for active-mode data connections. Use this property together with ActivePortRangeEnd to restrict the listener ports opened by the FTP client.

Specifies the size, in bytes, to send in an ALLO command before an upload. The default value of 0 disables the command.

ALLO asks the server to reserve storage for the incoming file. Most modern servers do not require it and may ignore it, but some specialized or quota-managed servers require the allocation request before accepting the transfer.

Controls whether machine-readable directory listings are requested with MLSD when the server advertises support. The default is 1.

MLSD returns standardized facts such as type, size, and modification time, making it more reliable than parsing the server-specific text produced by LIST. When MLSD is used, GetPermissions returns the server's perm fact rather than a UNIX-style permission string.

Set to 1 to request explicit FTPS by sending AUTH SSL after the initial unencrypted FTP connection is established. Set this property before calling Connect.

AUTH SSL is a legacy alternative to AUTH TLS. Use AuthTls for normal explicit FTPS unless the server specifically requires AUTH SSL. Do not also enable Ssl, which selects implicit FTPS.

Set to 1 to use explicit FTP over TLS. The client first connects using ordinary FTP, normally on port 21, and then sends AUTH TLS to protect the control connection. Set this property before calling Connect and leave Ssl set to 0.

The protection applied to data connections is controlled by DataProtection; its default behavior is to protect data connections when the control connection is protected.

Controls whether a FEAT command is sent automatically after connecting. The default is 1. The response allows Chilkat to detect capabilities such as MLSD, UTF8, EPSV, and server-specific extensions.

Set to 0 only for a server that mishandles FEAT. A conforming server that does not implement the command should simply return an error reply without closing the session.

Controls automatic correction of common FTPS settings based on Port. The default is 1. Before connecting:

Controls whether Chilkat requests the remote file size before each download so percentage-based progress can be calculated. The default is 0.

Enable this when the server's transfer reply does not provide a usable size and accurate PercentDoneScale callbacks are required. Each size query adds a control-channel round trip.

Controls whether OPTS UTF8 ON is sent automatically when the server advertises UTF8 support. The default is 1. This commonly causes CommandCharset and DirListingCharset to use UTF-8 for remote names and listings.

Set to 0 for a server that advertises UTF-8 but rejects the option or uses a different encoding in practice.

Controls whether UseEpsv is enabled automatically when the server advertises support for EPSV. The default is 0, and automatic detection also requires AutoFeat to be 1.

Controls whether a SYST command is sent automatically after connecting. The default is 1. The server's operating-system type can help Chilkat interpret legacy LIST output and other server-specific behavior.

Set to 0 only when a particular server rejects or mishandles SYST.

Controls automatic post-upload verification with the server-specific XCRC command. When enabled and the server supports XCRC, Chilkat requests a CRC after each upload and treats a mismatch as transfer failure.

This extension is not part of the core FTP standard and is not supported by every server. Capability detection normally depends on AutoFeat.

Specifies the approximate maximum download rate in bytes per second. The default value of 0 disables throttling.

Client-side download throttling is approximate because the server continues sending as permitted by TCP. The operating system's socket buffers absorb data between reads, so very small transfers may complete before the configured rate can be meaningfully enforced.

Specifies the approximate maximum upload rate in bytes per second. The default value of 0 disables throttling.

The limit is averaged over the transfer. Very small uploads may complete before the configured rate can be closely approximated.

Specifies the local IP address to which outgoing FTP sockets are bound. Leave this property empty to let the operating system select the interface and source address.

Set it only on a multihomed system when the FTP control connection must originate from a particular interface. Supply a numeric IPv4 or IPv6 address, not a hostname.

Specifies the character encoding used for FTP commands that contain non-ASCII path or file names. The default is ansi. When the server advertises UTF-8 and AutoOptsUtf8 is enabled, this property may be changed automatically to utf-8.

Contains a numeric reason code after Connect or ConnectOnly fails. Use this value for broad classification and inspect LastErrorText for detailed diagnostics.

Specifies the maximum number of seconds to wait while establishing the TCP connection to the FTP server. The default is 30. A value of 0 waits indefinitely.

This timeout covers connection establishment, not subsequent FTP replies or file data. Use IdleTimeoutMs and ReadTimeout for those operations.

Indicates whether the TCP connection to the FTP server was established during the most recent call to Connect or ConnectOnly. It does not indicate that FTP authentication succeeded; see LoginVerified.

Controls line-ending conversion when downloading in ASCII transfer mode. The default is 0.

Returns the number of bytes received during the current FTP download as a 32-bit unsigned integer. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Returns the number of bytes received during the current FTP download as a 64-bit integer. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Returns the number of bytes received during the current FTP download as a decimal string. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Returns the number of bytes sent during the current FTP upload as a 32-bit unsigned integer. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Returns the number of bytes sent during the current FTP upload as a 64-bit integer. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Returns the number of bytes sent during the current FTP upload as a decimal string. The value is updated while the transfer is in progress and may be read from another thread to display progress.

Specifies the protection level for FTP data connections. The value is compared case-insensitively.

If set to a file path, this property logs the LastErrorText of each Chilkat method or property call to the specified file. This logging helps identify the context and history of Chilkat calls leading up to any crash or hang, aiding in debugging.

Enabling the VerboseLogging property provides more detailed information. This property is mainly used for debugging rare instances where a Chilkat method call causes a hang or crash, which should generally not happen.

Possible causes of hangs include:

• A timeout property set to 0, indicating an infinite timeout.
• A hang occurring within an event callback in the application code.
• An internal bug in the Chilkat code causing the hang.

Specifies the character encoding used to decode legacy directory-listing bytes and remote names. The default is ansi. When the server advertises UTF-8 and AutoOptsUtf8 is enabled, this property may be changed automatically to utf-8.

This setting is most important when LIST or NLST is used. MLSD provides a standardized listing format, but names must still be decoded using the encoding used by the server.

Returns the current average download rate in bytes per second. The value is updated during synchronous and asynchronous downloads and describes the transfer in progress or the most recently completed download.

Controls automatic resolution of credential values from secure operating-system storage. The default is 0. When enabled, supported password properties may contain a secret specification beginning with !! instead of the literal password.

!![appName|]service[|domain]|username

Secret specifications are supported by Password, HttpProxyPassword, ProxyPassword, and SocksPassword. Chilkat resolves them through Windows Credential Manager on Windows or Apple Keychain on macOS.

Overrides the IP address advertised to the server in active-mode PORT commands. Supply a numeric IPv4 address, the keyword control, or a value prefixed with bind-.

• control uses the local address of the established control connection.
• bind-192.0.2.10 both advertises the address and binds the local data-listener socket to it.
• A plain address changes only the address sent in the FTP command.

Contains the initial FTP server greeting received immediately after the TCP or implicit-TLS connection is established. It normally begins with reply code 220 and may include server identification or policy information.

Indicates whether the server advertised support for MODE Z, which compresses FTP data streams using the DEFLATE algorithm. Call SetModeZ after connecting to enable it.

Specifies the FTP server hostname or numeric IPv4/IPv6 address. Do not include a URL scheme, path, or port; configure the port separately with Port.

Specifies the authentication method used with an HTTP proxy. Supported values are Basic and NTLM. Leave empty when the proxy does not require authentication.

Specifies the Windows domain used for NTLM authentication to the HTTP proxy. It is ignored for Basic authentication and may be left empty when the username already includes the required domain information.

Specifies the hostname or numeric IP address of an HTTP proxy used to establish the FTP control connection. Leave empty to connect directly.

Specifies the password used to authenticate to the HTTP proxy. It is used together with HttpProxyUsername and HttpProxyAuthMethod.

Specifies the TCP port of the HTTP proxy. Common values include 8080 and 3128, but the correct value is determined by the proxy configuration.

Specifies the username used to authenticate to the HTTP proxy. Leave empty when the proxy allows unauthenticated connections.

Specifies the maximum period, in milliseconds, during which no control-channel response or forward upload progress is observed. The default is 60000; 0 waits indefinitely.

During an upload, the same limit applies when the operating-system send buffer remains full because the server is not consuming data.

Deprecated. Indicates whether the object appears to be connected and authenticated. Reading this property may send NOOP to test the session. Use CheckConnection instead.

Controls collection of an in-memory FTP protocol log. When enabled, commands and server replies are available in SessionLog. Use ClearSessionLog to discard previously collected text.

Enables additional measures intended for very long uploads and downloads. The default is 0. When enabled, Chilkat periodically keeps the FTP control connection active so that servers, firewalls, and NAT devices are less likely to close it while a long data transfer is in progress.

Enable this only when long transfers succeed on the data channel but the idle control connection is being dropped.

Provides HTML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

Provides plain text information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

Provides XML-formatted information about the last called method or property. If a method call fails or behaves unexpectedly, check this property for details. Note that information is available regardless of the method call's success.

Indicates the success or failure of the most recent method call: 1 means success, 0 means failure. This property remains unchanged by property setters or getters. This method is present to address challenges in checking for null or Nothing returns in certain programming languages. Note: This property does not apply to methods that return integer values or to boolean-returning methods where the boolean does not indicate success or failure.

Contains the most recent FTP control-channel reply, including its three-digit status code and message. Examples include 250 Directory successfully changed. and 550 Failed to change directory.

Some replies are multiline; use this property together with the method return value and LastErrorText when diagnosing a failure.

Specifies an option string appended to the legacy LIST command, such as -a. It has no effect when AllowMlsd causes MLSD to be used.

LIST options and output formats are not standardized by FTP. Many UNIX-like servers pass the option to an underlying ls implementation, while other servers may reject or interpret it differently.

Specifies the wildcard pattern used when Chilkat populates its cached listing of the current remote directory. The default is *. It affects methods such as GetDirCount, GetFilename, GetIsDirectory, GetSize, and the listing timestamp methods.

Specify only a name pattern, such as *.txt. To list subdir/*.txt, first call ChangeRemoteDir for subdir, then set this property to *.txt.

Indicates whether FTP authentication succeeded during the most recent call to Connect or LoginAfterConnectOnly. A TCP connection may be established even when this property is 0; see ConnectVerified.

Indicates whether the most recent download method received some, but not all, of the remote file. It is 0 when no data was received or when the complete file was received.

This property helps distinguish a mid-transfer failure from a failure that occurred before any file data arrived.

Selects the FTP data-connection mode. The default is 1 for passive mode. Set to 0 for active mode.

Controls how the address returned by PASV is handled. The default is 1. When enabled, Chilkat ignores the IP address embedded in the server's PASV reply and connects to the control connection's server address using only the returned port.

This avoids private or otherwise unreachable addresses returned by FTP servers behind NAT, especially when TLS prevents a network device from rewriting the reply.

Specifies the password used for FTP authentication. For anonymous FTP, this is commonly an email address or arbitrary identifying string. Applications that already store the password in a SecureString should use SetSecurePassword instead.

Specifies the FTP server port. The usual port is 21 for plain FTP or explicit FTPS and 990 for implicit FTPS. When AutoFix is enabled, Chilkat adjusts the implicit/explicit TLS settings for these standard ports.

Controls address-family preference when a hostname resolves to both IPv4 and IPv6 addresses. The default is 0, which prefers IPv4. Set to 1 to prefer IPv6.

This setting does not force an unavailable protocol; it determines which address family is attempted first when both are present.

Controls whether NLST is preferred over LIST when a legacy directory listing is required. The default is 0. NLST generally returns names only and therefore cannot provide reliable sizes, timestamps, ownership, or permissions.

Specifies the expected size, in bytes, of the next file downloaded by GetFile when the server does not provide a usable size. Chilkat uses the value to calculate percentage progress. It applies to the next download and should be set immediately before the call.

The 64-bit form of ProgressMonSize. Specifies the expected size, in bytes, of the next download when the value may exceed the 32-bit integer range.

Specifies the hostname or IP address of a traditional FTP application proxy or firewall. This is distinct from an HTTP CONNECT proxy and from a SOCKS proxy. The login sequence is selected by ProxyMethod.

Selects the login sequence required by a traditional FTP proxy or firewall. The default is 0, meaning no FTP proxy. Configure ProxyHostname, ProxyPort, and the required proxy credentials before connecting.

USER ProxyUsername
PASS ProxyPassword
SITE Hostname
USER Username
PASS Password

USER Username@Hostname:Port
PASS Password

USER ProxyUsername
PASS ProxyPassword
USER Username@Hostname:Port
PASS Password

USER Username@Hostname:Port ProxyUsername
PASS Password
ACCT ProxyPassword

USER ProxyUsername
PASS ProxyPassword
OPEN Hostname
USER Username
PASS Password

USER ProxyUsername@Hostname
USER Username
PASS Password

USER ProxyUsername
USER ProxyPassword
SITE Hostname:Port
USER Username
PASS Password

USER Username@ProxyUsername@Hostname
PASS Password@ProxyPassword

ProxyUsername
ProxyPassword
Username
Password

Specifies the password used to authenticate to a traditional FTP proxy or firewall. Its placement in the login exchange depends on ProxyMethod.

Specifies the TCP port on which the traditional FTP proxy or firewall accepts connections.

Specifies the username used to authenticate to a traditional FTP proxy or firewall. Its placement in the login exchange depends on ProxyMethod.

Specifies the maximum number of seconds that a data connection may remain without receiving additional bytes. The default is 60.

This is an inactivity timeout, not a limit on total transfer duration. A large download may run indefinitely as long as data continues arriving within the configured interval.

Controls whether the FTP server certificate must pass normal TLS validation. When enabled, an untrusted chain, invalid signature, expired or not-yet-valid certificate, or hostname mismatch causes the TLS connection to fail.

Set to 1 immediately before an upload or download method to request that the transfer resume from the existing file position instead of starting over. The setting applies to the next applicable transfer.

Resume requires compatible server support and a correct partial local or remote file. The application should verify that the existing content belongs to the same file version before resuming.

Contains the in-memory FTP session log collected while KeepSessionLog is 1. The log includes protocol commands and server replies and is useful for troubleshooting. Passwords and other sensitive information may appear; handle the text accordingly.

Specifies the hostname or IP address of the SOCKS proxy. It is used only when SocksVersion is 4 or 5.

Specifies the password for SOCKS5 username/password authentication. It is ignored for SOCKS4, which has no password-authentication field.

Specifies the SOCKS proxy port. The default is 1080. It is used only when SocksVersion is 4 or 5.

Specifies the SOCKS user identifier. SOCKS5 may use it with password authentication; SOCKS4 sends it as the protocol user ID. It is used only when SocksVersion is 4 or 5.

Selects SOCKS proxy usage.

Specifies the requested receive-buffer size, in bytes, for FTP data sockets. The default is 4194304. Normally this should remain unchanged.

A larger buffer can help on high-bandwidth, high-latency paths, but actual buffer sizing is controlled by the operating system. This setting does not apply to the FTP control connection.

Specifies the requested send-buffer size, in bytes, for FTP data sockets. The default is 262144. Normally this should remain unchanged.

Testing larger values can help uploads on high-bandwidth, high-latency paths, but actual buffer sizing is controlled by the operating system. This setting does not apply to the FTP control connection.

Set to 1 to use implicit FTP over TLS, normally on port 990. TLS begins immediately when the TCP connection is established. Do not also enable AuthTls or AuthSsl, which select explicit FTPS.

Restricts the TLS cipher suites offered by the client. The default empty string allows the cipher suites enabled by the Chilkat build and its TLS policy. To restrict negotiation, supply a comma-separated list of IANA cipher-suite names in preference order.

The server selects one suite from the overlap between the client and server lists. Additional compatibility keywords supported by Chilkat may also be included, such as rsa2048, secure-renegotiation, or best-practices.

Specifies the TLS protocol policy for implicit and explicit FTPS connections. The default is default, which allows Chilkat to negotiate an appropriate protocol supported by both peers.

Other exact and or higher forms accepted by the API may be used for compatibility. Choosing an exact version causes the connection to fail if the server cannot negotiate that version.

Indicates whether the server's TLS certificate chain and validity checks succeeded for the current or most recent FTPS connection. It is meaningful only after a TLS connection attempt.

This property reports certificate verification; the method return value and LastErrorText remain the authoritative indicators of overall connection success.

Controls whether download synchronization creates empty remote directories on the local filesystem. The default is 1. When 0, a local directory is created only when it is needed to contain a downloaded file.

Specifies a semicolon-separated list of case-insensitive wildcard patterns for files that are eligible for synchronization and tree operations. For example: *.xml;*.txt;*.csv.

When nonempty, a file must match at least one pattern. This filter applies to synchronization methods and also to DownloadTree and DirTreeXml.

Specifies a semicolon-separated list of case-insensitive wildcard patterns for directories that synchronization methods are allowed to enter. For example: src;data_*;reports. When nonempty, a directory must match at least one pattern before its contents are traversed.

Specifies a semicolon-separated list of case-insensitive wildcard patterns for files that must be excluded from synchronization and tree operations. For example: *.tmp;*.bak;~*.

Exclusion is applied in addition to SyncMustMatch. This filter also applies to DownloadTree and DirTreeXml.

Specifies a semicolon-separated list of case-insensitive wildcard patterns for directories that synchronization methods must not enter. For example: .git;temp;archive_*. Exclusion is applied in addition to SyncMustMatchDir.

Contains the preview produced by SyncRemoteTree2 when ARG4 is 1. Each CRLF-delimited line is a local path that would be uploaded if preview mode were disabled.

Contains the cipher suite negotiated for the current or most recent successful TLS connection, such as TLS_AES_256_GCM_SHA384. It is empty before a TLS session has been established or after a failed attempt that produced no negotiated suite.

Specifies one or more expected Subject Public Key Info (SPKI) fingerprints for TLS public-key pinning. The format is:

hashAlgorithm, encoding, fingerprint1, fingerprint2, ...

sha256, base64, lKg1SIqyhPSK19tlPbjl8s02yChsVTDklQpkMCHvsTE=

If the server certificate's SPKI fingerprint matches none of the listed pins, the TLS handshake fails. Multiple pins allow planned certificate or key rotation.

Contains the protocol version negotiated for the current or most recent successful TLS connection, such as TLS 1.2 or TLS 1.3. It is empty when no TLS session has been established.

Provides a comma-separated list of compatibility options for uncommon platform or server requirements. The default is empty and should normally remain empty.

Returns the current average upload rate in bytes per second. The value is updated during synchronous and asynchronous uploads and describes the transfer in progress or the most recently completed upload.

Controls whether passive data connections use EPSV instead of PASV. The default is 0. EPSV returns only a port number and is the passive command used with IPv6.

AutoSetUseEpsv can enable this property automatically when the server advertises support.

Specifies the FTP login name. The default is anonymous. Set it to an empty string to have Connect establish the connection without performing authentication; authentication may then be handled separately with LoginAfterConnectOnly.

When set to 1, all string arguments and return values are interpreted as UTF-8 strings. When set to 0, they are interpreted as ANSI strings.

In Chilkat v11.0.0 and later, the default value is 1. Before v11.0.0, it was 0.

If set to 1, then the contents of LastErrorText (or LastErrorXml, or LastErrorHtml) may contain more verbose information. The default value is 0. Verbose logging should only be used for debugging. The potentially large quantity of logged information may adversely affect peformance.

Version of the component/library, such as "10.1.0"

Appends the contents of the local file at localFilePath to the remote file at remoteFilePath. If the remote file does not exist, server behavior may be equivalent to creating it. Both arguments are paths in their respective local and remote filesystems.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the AppendFile method with the arguments provided.

Returns NULL on failure

Appends the bytes in the BinData object bd to the remote file at remoteFilename. No text encoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the AppendFileBd method with the arguments provided.

Returns NULL on failure

Encodes the text in textData using the character encoding named by charset and appends the resulting bytes to the remote file at remoteFilename.

This method controls the encoding of the file content. The encoding used for the remote filename itself is controlled separately by CommandCharset.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the AppendFileFromTextData method with the arguments provided.

Returns NULL on failure

Encodes the text in the StringBuilder sb using the charset named by charset and appends the resulting bytes to the remote file at remoteFilename.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the AppendFileSb method with the arguments provided.

Returns NULL on failure

Changes the current working directory on the FTP server to remoteDirPath. A relative path is resolved from the current remote directory; an absolute path is interpreted according to the server's path syntax.

Some servers accept a multi-level path in one CWD command, while others require one directory level at a time.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the ChangeRemoteDir method with the arguments provided.

Returns NULL on failure

Tests whether the FTP control session is still connected and authenticated. The method may send NOOP so the result reflects the server's response rather than only the local socket state.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the CheckConnection method with the arguments provided.

Returns NULL on failure

Requests that an explicit-FTPS control connection return to clear text after authentication. Data connections may remain protected according to DataProtection.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the ClearControlChannel method with the arguments provided.

Returns NULL on failure

Clears the cached listing for the current remote directory. The next call to GetDirCount or another indexed listing method retrieves a fresh listing from the server. The cache is also invalidated when the current directory or ListPattern changes.

Clears the in-memory FTP protocol log collected while KeepSessionLog is enabled.

Connects to the server specified by Hostname and Port, negotiates any configured TLS or proxy layer, receives the FTP greeting, and authenticates using Username, Password, and Account.

To separate connection establishment from authentication, call ConnectOnly followed by LoginAfterConnectOnly.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Connect method with the arguments provided.

Returns NULL on failure

Establishes the configured proxy, TCP, and TLS connection and receives the FTP server greeting, but does not send the FTP login commands. Complete authentication by calling LoginAfterConnectOnly.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the ConnectOnly method with the arguments provided.

Returns NULL on failure

Upgrades an already-connected clear FTP control channel to TLS. This method is intended for a manually staged connection created with ConnectOnly.

Do not call it when AuthTls or AuthSsl was enabled before connecting; those properties perform the upgrade automatically.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the ConvertToTls method with the arguments provided.

Returns NULL on failure

Creates and returns a textual upload plan for the local directory at localDir. The plan lists the operations that PutTree would perform and can later be executed by PutPlan.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the CreatePlan method with the arguments provided.

Returns NULL on failure

Creates the remote directory at remoteDirPath by sending the server's directory-creation command. The path is interpreted relative to the current remote directory unless the server recognizes it as absolute.

If the directory already exists, the server commonly returns an error and the method fails.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the CreateRemoteDir method with the arguments provided.

Returns NULL on failure

Deletes files in the current remote directory whose names match the wildcard pattern in remotePattern. The method returns the number deleted, or -1 if the operation fails.

* matches zero or more characters. Matching details may depend on the server because the remote listing operation is server-side.

Creates an asynchronous task to call the DeleteMatching method with the arguments provided.

Returns NULL on failure

Deletes the remote file at remoteFilePath. The path may be relative to the current remote directory or absolute according to the server's path syntax.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the DeleteRemoteFile method with the arguments provided.

Returns NULL on failure

Recursively deletes the files and subdirectories beneath the current remote directory and then removes directories as they become empty.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the DeleteTree method with the arguments provided.

Returns NULL on failure

Returns an XML representation of the complete remote directory tree rooted at the current remote directory. Traversal is affected by SyncMustMatch, SyncMustNotMatch, SyncMustMatchDir, and SyncMustNotMatchDir.

This method retrieves metadata; it does not download file content.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the DirTreeXml method with the arguments provided.

Returns NULL on failure

Ends the FTP session and closes the control connection. When possible, Chilkat sends the normal FTP quit command before closing the socket.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Disconnect method with the arguments provided.

Returns NULL on failure

Downloads all selected files and subdirectories beneath the current remote directory and recreates the tree under the local directory at localRoot.

The file and directory filters in SyncMustMatch, SyncMustNotMatch, SyncMustMatchDir, and SyncMustNotMatchDir apply. Use SetOldestDateStr to exclude files older than a chosen date.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the DownloadTree method with the arguments provided.

Returns NULL on failure

Sends FEAT and returns the server's multiline capability reply. A server may return an error when the command is unsupported. Chilkat also performs capability discovery automatically when AutoFeat is enabled.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Feat method with the arguments provided.

Returns NULL on failure

Returns the creation time for the file or directory named by filename in the current remote directory as an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name so the item is present in the cached listing.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetCreateTimeByNameStr method with the arguments provided.

Returns NULL on failure

Returns the creation time for cached directory-listing entry index as an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600. index is a zero-based index from 0 through one less than GetDirCount. Creation-time availability depends on the server and listing format.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetCreateTimeStr method with the arguments provided.

Returns NULL on failure

Returns the current working directory reported by the FTP server, normally by using the PWD command.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetCurrentRemoteDir method with the arguments provided.

Returns NULL on failure

Returns the number of files and directories in the cached listing of the current remote directory after applying ListPattern. On the first call, Chilkat obtains and caches a listing; call ClearDirCache to force a refresh. Returns -1 if the listing cannot be obtained or parsed.

Creates an asynchronous task to call the GetDirCount method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilePath to the local filesystem path at localFilePath. The local file is created or replaced according to the normal download behavior.

Use RestartNext immediately before this call to request resume of an existing partial file. ReadTimeout controls data-channel inactivity.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetFile method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilePath and places its bytes in the BinData object in binData. No text decoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetFileBd method with the arguments provided.

Returns NULL on failure

Returns the name of cached directory-listing entry index. index is a zero-based index from 0 through one less than GetDirCount. The returned value is the name from the listing, not necessarily a full remote path.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetFilename method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilePath, decodes its bytes using the charset named by charset, and places the resulting text in the StringBuilder in sb.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetFileSb method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilePath and writes its bytes to the Stream in toStream.

For a synchronous call, toStream must be configured with a destination sink before the method begins. For an asynchronous call, application code may read from the stream while the background download produces data.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetFileToStream method with the arguments provided.

Returns NULL on failure

Returns the group name or identifier for cached directory-listing entry index. The value is empty when the server does not provide group metadata.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetGroup method with the arguments provided.

Returns NULL on failure

Returns 1 when cached directory-listing entry index is identified as a directory. index is a zero-based index into the current cached listing.

Creates an asynchronous task to call the GetIsDirectory method with the arguments provided.

Returns NULL on failure

Returns 1 when cached directory-listing entry index is identified as a symbolic link. This information is available only when the server's listing format reports it.

Creates an asynchronous task to call the GetIsSymbolicLink method with the arguments provided.

Returns NULL on failure

Copies JSON details from the most recent method call into the JsonObject in json. Only methods that produce structured supplemental information populate this data; otherwise the object may remain empty. Call this method immediately after the operation whose details are needed.

Returns 1 for success, 0 for failure.

Returns the last-modified time for the item named by filename in the current remote directory as an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetLastModifiedTimeByNameStr method with the arguments provided.

Returns NULL on failure

Returns the last-modified time for cached directory-listing entry index as an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600. index is a zero-based index into the current cached listing.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetLastModifiedTimeStr method with the arguments provided.

Returns NULL on failure

Returns the owner name or identifier for cached directory-listing entry index. The value is empty when the server does not provide owner metadata.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetOwner method with the arguments provided.

Returns NULL on failure

Returns the permissions or status string for cached directory-listing entry index. The value is empty when the server provides no such metadata. Use GetPermType to determine how to interpret the result.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetPermissions method with the arguments provided.

Returns NULL on failure

Returns the format identifier for the permissions string available for cached listing entry index. The value is empty when no permissions are available.

Use GetPermissions to obtain the corresponding value.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetPermType method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilename, decodes its bytes using the character encoding named by charset, and returns the resulting text.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetRemoteFileTextC method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilename and returns its contents decoded using the ANSI character encoding. Use GetRemoteFileTextC when the file uses UTF-8 or another explicitly known encoding.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetRemoteFileTextData method with the arguments provided.

Returns NULL on failure

Loads into the Cert object in cert the certificate presented by the FTP server during the current or most recent TLS connection.

Returns 1 for success, 0 for failure.

Returns the size in bytes of cached directory-listing entry index as a 32-bit integer. Use GetSize64 for large files. A negative value indicates that the size is unavailable or the operation failed.

Creates an asynchronous task to call the GetSize method with the arguments provided.

Returns NULL on failure

Returns the size in bytes of cached directory-listing entry index as a 64-bit integer. Returns -1 when the size is unavailable or the operation fails.

Creates an asynchronous task to call the GetSize64 method with the arguments provided.

Returns NULL on failure

Returns the size in bytes of the file named by filename in the current remote directory as a 32-bit integer. Returns -1 when the file is not found or the size cannot be obtained. Use GetSizeByName64 for large files.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name.

Creates an asynchronous task to call the GetSizeByName method with the arguments provided.

Returns NULL on failure

Returns the size in bytes of the file named by filename in the current remote directory as a 64-bit integer. Returns -1 when the file is not found or the size cannot be obtained.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name.

Creates an asynchronous task to call the GetSizeByName64 method with the arguments provided.

Returns NULL on failure

Returns the size in bytes of cached directory-listing entry index as a decimal string. This form avoids integer-size limits in languages without a convenient 64-bit type.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetSizeStr method with the arguments provided.

Returns NULL on failure

Returns the size in bytes of the file named by filename in the current remote directory as a decimal string. This form avoids language-specific integer limits.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetSizeStrByName method with the arguments provided.

Returns NULL on failure

Appends to the StringTable in strTable the relative paths affected by the most recent synchronization operation. This includes files uploaded, downloaded, or deleted by SyncDeleteRemote, SyncLocalDir, SyncLocalTree, SyncRemoteTree, or SyncRemoteTree2.

Sends a directory-listing request for pattern and returns the server's raw textual listing. pattern may be a wildcard pattern or other argument accepted by the server.

The format of LIST output is server-specific; use the indexed listing methods or GetXmlDirListing when parsed metadata is preferred.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetTextDirListing method with the arguments provided.

Returns NULL on failure

Retrieves a directory listing for pattern and returns the parsed entries as XML. pattern may be a wildcard pattern accepted by the server. The metadata available depends on whether the server provides MLSD facts or a parseable legacy listing.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetXmlDirListing method with the arguments provided.

Returns NULL on failure

Uploads the local file at localPath to the remote path at remotePath as a sequence of append operations, each containing up to chunkSize bytes.

This method addresses a specific FTP failure mode: during one very long data transfer, the control connection is idle and may be silently dropped by a firewall, NAT device, or server timeout. Completing the upload as multiple shorter transfers periodically uses the control channel.

chunkSize is the in-memory chunk size. Larger chunks reduce FTP command overhead but consume more memory and leave the control channel idle longer; smaller chunks have the opposite tradeoff.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the LargeFileUpload method with the arguments provided.

Returns NULL on failure

Loads the original caller object associated with the asynchronous Task in task. This is an internal support method for Chilkat's task infrastructure and is not normally needed by application code.

Returns 1 for success, 0 for failure.

Authenticates an FTP session previously established by ConnectOnly, using Username, Password, and Account. Together, ConnectOnly and this method perform the connection and login stages of Connect.

After authentication, Chilkat performs the configured automatic capability and system queries. Set AutoFeat or AutoSyst to 0 to suppress those commands.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the LoginAfterConnectOnly method with the arguments provided.

Returns NULL on failure

Downloads files in the current remote directory that match remotePattern into the local directory at localDir. Subdirectories are not traversed. The method returns the number of files downloaded, or -1 on failure.

Wildcard matching is performed by the FTP server's listing command and may be case-sensitive or case-insensitive according to the remote server and filesystem.

Creates an asynchronous task to call the MGetFiles method with the arguments provided.

Returns NULL on failure

Uploads each local file matching pattern to the current remote directory. pattern may include a local directory and wildcard, such as C:/data/*.txt. Subdirectories are not traversed.

The method returns the number of files uploaded, or -1 on failure.

Creates an asynchronous task to call the MPutFiles method with the arguments provided.

Returns NULL on failure

Sends NLST with remoteDirPattern and returns the names in XML form. remoteDirPattern may be a pattern such as *, *.txt, or subdir/*.xml.

<nlst>
  <e>name1</e>
  <e>name2</e>
</nlst>

NLST normally returns names only; it does not provide reliable sizes, times, or permissions.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the NlstXml method with the arguments provided.

Returns NULL on failure

Sends the FTP NOOP command. This can test whether the control session is still responsive or keep an otherwise idle control connection active.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Noop method with the arguments provided.

Returns NULL on failure

Uploads the local filesystem file at localFilePath to the remote path at remoteFilePath. The remote file is created or replaced according to server behavior.

Use RestartNext immediately before this call to request resume of an existing partial remote file. IdleTimeoutMs limits how long the upload may remain blocked without forward progress.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutFile method with the arguments provided.

Returns NULL on failure

Uploads the bytes contained in the BinData object in binData to the remote path at remoteFilePath. No character encoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutFileBd method with the arguments provided.

Returns NULL on failure

Encodes the text in textData using the character encoding named by charset and uploads the resulting bytes to the remote file at remoteFilename.

charset controls the file content encoding. Remote filename encoding is controlled separately by CommandCharset.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutFileFromTextData method with the arguments provided.

Returns NULL on failure

Encodes the text in the StringBuilder sb using the charset named by charset and uploads it to the remote path at remoteFilePath. When includeBom is 1, a byte-order mark is included when the selected encoding defines one.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutFileSb method with the arguments provided.

Returns NULL on failure

Executes the upload plan in plan. alreadyDoneFilename is the local path of a completion log; each successful plan operation is recorded there.

To resume an interrupted plan, call this method again with the same plan and log path. Operations already recorded as complete are skipped.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutPlan method with the arguments provided.

Returns NULL on failure

Uploads the local directory tree rooted at localDir into the current remote directory, creating remote subdirectories as needed. The contents of localDir become children of the current remote directory.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutTree method with the arguments provided.

Returns NULL on failure

Sends the raw FTP command text in cmd to the server. Use this for a command not otherwise exposed by the API.

cmd should contain the command and parameters but not the terminating CRLF. The method does not parse command-specific semantics.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Quote method with the arguments provided.

Returns NULL on failure

Removes the remote directory at remoteDirPath. FTP servers generally require the directory to be empty before it can be removed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the RemoveRemoteDir method with the arguments provided.

Returns NULL on failure

Renames or moves a remote file or directory from existingRemoteFilePath to newRemoteFilePath using the FTP rename sequence. Include directory components in newRemoteFilePath to move the item within the same FTP server.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the RenameRemoteFile method with the arguments provided.

Returns NULL on failure

Sends the raw FTP command in cmd and returns the complete server reply. Use this when the reply text is required directly. cmd should not include the terminating CRLF.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SendCommand method with the arguments provided.

Returns NULL on failure

Enables MODE Z compression for subsequent data connections. Call this after connecting and only when HasModeZ is 1. Uploads, downloads, and directory listings are then transferred through a DEFLATE-compressed stream.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SetModeZ method with the arguments provided.

Returns NULL on failure

Sets the oldest remote modification time eligible for the next DownloadTree operation. oldestDateTimeStr is an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600. Files older than this value are skipped.

Enables or disables a named compatibility option. option identifies the option; prefix the name with No- to disable it.

The recognized option Microsoft-TLS-1.2-Workaround changes data-channel TLS behavior for compatibility with an old Microsoft FTP server defect. It weakens protocol selection and should be used only for the affected legacy server.

Returns 1 for success, 0 for failure.

Sets the last-modified time of the remote file at remoteFilename. dateTimeStr is an RFC 822 date-time string, such as Fri, 21 Nov 1997 09:55:06 -0600.

FTP has no universally supported standard command for changing a file timestamp; success depends on server extensions and permissions.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SetRemoteFileDateTimeStr method with the arguments provided.

Returns NULL on failure

Sets the last-modified time of the remote file at remoteFilename from the DateTime object in dt.

FTP has no universally supported standard command for changing a file timestamp; success depends on server extensions and permissions.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SetRemoteFileDt method with the arguments provided.

Returns NULL on failure

Copies the password from the SecureString in password for subsequent FTP authentication. This avoids exposing the password as an ordinary immutable language string. It is equivalent to setting Password for login behavior.

Returns 1 for success, 0 for failure.

Adds a required match against the FTP server certificate. reqName selects the certificate field and reqValue specifies the required value. Supported field names include SubjectDN, SubjectCN, IssuerDN, IssuerCN, and SAN. Wildcards may be used in reqValue.

The TLS connection is rejected when the presented certificate does not satisfy the requirement.

Configures the Cert in cert as the client certificate for FTPS servers that request mutual TLS authentication. The certificate must have access to its private key.

Returns 1 for success, 0 for failure.

Configures a client certificate and private key from PEM data or a PEM file. pemDataOrFilename may contain the PEM text or the local filesystem path of a PEM file. pemPassword is the private-key password, or an empty string when the key is not encrypted.

Returns 1 for success, 0 for failure.

Loads a client certificate and private key from the local PFX/P12 file at pfxFilename. pfxPassword is the file password. The certificate is used when the FTPS server requests mutual TLS authentication.

Returns 1 for success, 0 for failure.

Sets the FTP representation type to ASCII for subsequent transfers. In ASCII mode, the FTP endpoints may translate line endings, and CrlfMode can apply additional conversion on downloads.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SetTypeAscii method with the arguments provided.

Returns NULL on failure

Sets the FTP representation type to binary (TYPE I) for subsequent transfers. Binary mode preserves file bytes and is the appropriate default for nearly all modern file types.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SetTypeBinary method with the arguments provided.

Returns NULL on failure

Sends a server-specific SITE command. siteCommand contains the text following SITE, for example RECFM=FB LRECL=600.

SITE subcommands are defined by the server, not by the FTP standard, and may require special permissions.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Site method with the arguments provided.

Returns NULL on failure

Blocks the calling thread for millisec milliseconds. This is a utility method and performs no FTP network operation.

Sends the FTP STAT command and returns the server's reply. Depending on the server and session state, the reply may contain status information or a directory listing.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Stat method with the arguments provided.

Returns NULL on failure

Recursively compares the remote tree rooted at the current remote directory with the local tree rooted at localRoot and deletes remote files that have no corresponding local file.

Use GetSyncedFiles after the call to obtain the relative paths deleted.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SyncDeleteRemote method with the arguments provided.

Returns NULL on failure

Synchronizes files from the current remote directory into the local directory at localRoot without descending into subdirectories. mode selects the same download mode documented for SyncLocalTree. Use GetSyncedFiles afterward to obtain the affected relative paths.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SyncLocalDir method with the arguments provided.

Returns NULL on failure

Synchronizes the remote tree rooted at the current remote directory into the local directory at localRoot. mode selects which files are downloaded or deleted.

The synchronization filters apply, and GetSyncedFiles returns the relative paths affected by the operation.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SyncLocalTree method with the arguments provided.

Returns NULL on failure

Synchronizes the local tree rooted at localRoot into the current remote directory. mode selects which files are uploaded.

The synchronization filters apply, and GetSyncedFiles returns the relative paths uploaded.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SyncRemoteTree method with the arguments provided.

Returns NULL on failure

Provides the upload synchronization behavior of SyncRemoteTree with traversal and preview controls. localDirPath is the local root, mode is the synchronization mode, bDescend controls whether subdirectories are traversed, and bPreviewOnly selects preview-only mode.

When bPreviewOnly is 1, files are not uploaded and the candidate file paths are placed in SyncPreview. Required remote directories may still be created during the preview.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the SyncRemoteTree2 method with the arguments provided.

Returns NULL on failure

Sends SYST and returns the server's operating-system type reply. Chilkat can use this information when interpreting legacy directory listings.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the Syst method with the arguments provided.

Returns NULL on failure

Deprecated. Returns the number of bytes received during the current FTP download as a 32-bit unsigned integer. The value is updated while the transfer is running. Use CurBytesReceived instead.

Deprecated. Returns the number of bytes received during the current FTP download as a 64-bit integer. The value is updated while the transfer is running. Use CurBytesReceived64 instead.

Deprecated. Returns the number of bytes received during the current FTP download as a decimal string. The value is updated while the transfer is running. Use CurBytesReceivedStr instead.

Deprecated. Returns the number of bytes sent during the current FTP upload as a 32-bit unsigned integer. The value is updated while the transfer is running. Use CurBytesSent instead.

Deprecated. Returns the number of bytes sent during the current FTP upload as a 64-bit integer. The value is updated while the transfer is running. Use CurBytesSent64 instead.

Deprecated. Returns the number of bytes sent during the current FTP upload as a decimal string. The value is updated while the transfer is running. Use CurBytesSentStr instead.

Appends the bytes in content to the remote file named by remoteFilename. No character encoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the AppendFileFromBinaryData method with the arguments provided.

Returns NULL on failure

Deprecated. Tries the supported traditional FTP-proxy login sequences and returns the first successful ProxyMethod value. Returns 0 when none succeeds and -1 when the test cannot be completed.

Creates an asynchronous task to call the DetermineProxyMethod method with the arguments provided.

Returns NULL on failure

Deprecated. Tests combinations of Ssl, AuthTls, AuthSsl, Port, Passive, and PassiveUseHostAddr by attempting a directory listing, then returns an XML report.

The method performs multiple network attempts and can take significant time. Prefer configuring the connection explicitly from the server's documented FTP/FTPS settings.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the DetermineSettings method with the arguments provided.

Returns NULL on failure

Deprecated. Returns a new DateTime containing the creation time for cached directory-listing entry index. Use GetCreateTimeStr when a string result is preferred. index is a zero-based index from 0 through one less than GetDirCount.

Returns NULL on failure

Creates an asynchronous task to call the GetCreateDt method with the arguments provided.

Returns NULL on failure

Deprecated. Returns a new DateTime containing the creation time for the file or directory named by filename in the current remote directory. Use GetCreateTimeByNameStr when a string result is preferred.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name so the item is present in the cached listing.

Returns NULL on failure

Creates an asynchronous task to call the GetCreateDtByName method with the arguments provided.

Returns NULL on failure

Deprecated. Returns a new DateTime containing the last-modified time for cached directory-listing entry index. Use GetLastModifiedTimeStr when a string result is preferred.

Returns NULL on failure

Creates an asynchronous task to call the GetLastModDt method with the arguments provided.

Returns NULL on failure

Deprecated. Returns a new DateTime containing the last-modified time for the item named by filename in the current remote directory. Use GetLastModifiedTimeByNameStr when a string result is preferred.

filename must be a name, not a path. Set the current remote directory first, and ensure ListPattern matches the name.

Returns NULL on failure

Creates an asynchronous task to call the GetLastModDtByName method with the arguments provided.

Returns NULL on failure

Downloads the remote file at remoteFilename and returns its bytes. No character decoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the GetRemoteFileBinaryData method with the arguments provided.

Returns NULL on failure

Deprecated. Returns a new Cert containing the certificate presented by the FTP server during the current or most recent TLS connection. Use GetServerCert instead.

Returns NULL on failure

Creates or replaces the remote file at remoteFilename with the bytes in content. No character encoding or line-ending conversion is performed.

Returns 1 for success, 0 for failure.

Creates an asynchronous task to call the PutFileFromBinaryData method with the arguments provided.

Returns NULL on failure